Z-Racing Screen

Description

Give your motorcycle the sporty character you are looking for with the Puig Z-Racing windscreen, designed to combine aggressive styling with improved rider comfort and aerodynamic protection.

The Z-Racing range has been developed to offer greater aerodynamic efficiency compared with each motorcycle’s original windscreen. Its design is analyzed using a virtual wind tunnel to optimize the aerodynamic coefficient (Cx) and reduce air pressure on the rider.

Thanks to its double-height design, the windscreen deflects the airflow that would otherwise directly hit the helmet and upper torso. In addition, its two side channels collect and direct the air outwards, helping to reduce pressure on the rider’s shoulders. Compared with the original windscreen, Z-Racing windscreens offer an average aerodynamic improvement of 12.7% in an upright riding position and up to 61% in a racing riding position.

Designed and manufactured in Barcelona using advanced technologies, they are made from 3 mm thick high-impact acrylic, resulting in a strong, lightweight and durable product. Their rounded edge of more than 2 mm meets the safety requirements established by the German TÜV.

During the manufacturing process, Puig uses a machine vision system for quality control to ensure that every windscreen reaches the customer in perfect condition.

Z-Racing windscreens are available in a wide variety of colors, allowing riders to customize the appearance of their motorcycle according to their preferences.

Installation is simple and does not require additional elements such as edging. Each windscreen comes with a detailed aerodynamic study showing the improvements achieved compared with the original configuration.

Before purchasing, check the DOCUMENTS section to see whether the selected reference has KBA approval and whether it is included in the corresponding documentation.

Important: carefully check the ABE documentation to confirm that this reference is suitable and approved for your specific motorcycle model.

Fitment

This part fits the following vehicles.

• 2006-2010 Aprilia Tuono 1000 R
• 2006-2016, 2018-2025 Suzuki GSX-R750
• 2006-2025 Suzuki GSX-R600
• 2007-2008 Ducati 1098
• 2007-2008 Ducati 1098 S
• 2007-2026 Suzuki GSX-R1000
• 2008-2010 Ducati 848
• 2008-2010 KTM 1190 RC8
• 2008-2020 Yamaha YZF-R6
• 2008 Ducati 1098 R
• 2009-2011 Ducati 1198
• 2009-2011 Ducati 1198 S
• 2009-2015 KTM 1190 RC8 R
• 2009-2017 Triumph Daytona 675
• 2009-2025 Yamaha YZF-R1
• 2009-2026 BMW S1000RR
• 2010-2015 MV Agusta F4
• 2010-2016 Aprilia Shiver 750
• 2010-2016 Honda VFR1200F
• 2011-2015 Honda CBR250R
• 2011-2016 Honda CBR125R
• 2011-2017 Triumph Daytona 675 R
• 2011-2023 Ducati 848 EVO
• 2012-2020 MV Agusta F3 675
• 2013-2014 Aprilia RSV4 Factory
• 2013-2014 Aprilia RSV4 R
• 2013-2015 MV Agusta F4-1000R
• 2013-2016 Aprilia RS4 125
• 2013-2025 Honda CBR600RR
• 2013-2026 Honda CBR500R
• 2014-2018 Honda CBR650F
• 2014-2021 MV Agusta F3 800 RC
• 2014-2023 MV Agusta F3 800
• 2014-2026 KTM RC 125
• 2014-2026 KTM RC 390
• 2015-2016 Suzuki GW250F
• 2015-2018 Aprilia RSV4 RR
• 2015-2018 Yamaha YZF-R3
• 2015-2020 Aprilia Tuono V4 1100 RR
• 2015-2020 Honda CBR300R
• 2015-2024 Aprilia Tuono V4 1100 Factory
• 2016-2024 Yamaha YZF-R1M
• 2017-2018 Aprilia RSV4 RF
• 2017-2026 Suzuki GSX-R1000R
• 2019-2026 Honda CBR650R
• 2020-2025 Honda CBR1000RR-R Fireblade
• 2021-2022 BMW M1000RR
• 2021-2024 Aprilia Tuono V4 1100
• 2021-2026 Aprilia RS 125
• 2021-2026 Aprilia RS 660
• 2021-2026 Aprilia Tuono 660
• 2021-2026 Ducati SuperSport 950
• 2021-2026 Ducati SuperSport 950 S
• 2022-2026 Aprilia Tuono 660 Factory
• 2022-2026 CFMOTO 450 SR
• 2022-2026 Yamaha YZF-R7
• 2023-2026 CFMOTO 450SS
• 2024-2026 Aprilia RS 457
• 2024-2026 Honda CBR650R E-Clutch
• 2024-2026 Kawasaki Ninja e-1
• 2024-2026 Suzuki GSX-8R
• 2024-2026 Triumph Daytona 660
• 2025-2026 Aprilia RS 660 Factory
• 2025-2026 CFMOTO 675SS
• 2025-2026 Ducati Panigale V2
• 2025-2026 Ducati Panigale V2 S
• 2025-2026 Yamaha YZF-R9
• 2026 KTM 990 RC R

Features & benefits

• Approved for use on public roads. High-resistance thermoplastic polymer. Specific model identification according to approval. Complies with TÜV certification standards. Improves airflow and stability. Enhances safety and improves aesthetics. UV resistant for greater durability.

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).